Clean and Safe Sandblasting . . . Indoors
Recirculating Sandblaster Uses Any Blasting Media.Now you can have all the benefits of sandblasting without any of the problems or time-consuming clean-ups. Sandblasting indoors with the QUIK-BLAST sandblaster is convenient, clean, economical, and safe. It’s clearly preferable to grinding discs because the QUIK-BLAST sandblaster removes surface impurities without affecting the base material.The Better Alternative for Surface Preparation
With its integrated vacuum and filtration system, QUIK-BLAST makes possible dust-free cleaning of the surface prior to painting or finishing, and after welding.
It removes rust, old paint, grime and oxides from metal quickly, thoroughly and safely. The QUIK-BLAST sandblaster is ideal for working in tight spots, irregular areas, and on virtually any surface. Compare it with ordinary sandblasters on design features, quality performance, and you will see why it’s your best machine for the money.
Typical Applications
“The Quik-Blast . . . has become an integral tool in our shop.” A satisfied customer.
Polishing a moldwith glass bead.
Welding
Finishing treatment for welded surfaces
Boating
Removal of Paint from wood and fiberglass
Automotive
Door jams
Windshield flashing
Aviation
Corrosion removal from aircraft structures
General Industries/Plants
Clean, polish rubber molds on or off press. Surface preparation prior to metalizing Nuclear power plants for maintenance where maximum cleanliness must be maintained
Simple Operation, Top Performance, Low Operating Cost
The QUIK-BLAST sandblaster is simple to operate. Connect the air hose to the gun, plug in the power cord, and turn on the switch. The rubber bellows on the nozzle is designed to prevent the blasting media and debris from escaping into the atmosphere. While holding the bellows firmly against the surface, the abrasive media blasts the area to be cleaned. The blasting media and debris are then returned to the cyclone separator via the suction return hose. Our unique cyclonic separator then separates the usable blasting media from the debris. While the lighter debris is drawn up to the efficient 2-stage filter and debris collection bucket, the clean, heavier media is dropped back into the hopper for re-use.
A 4″ clean-out port is located at the bottom of the cyclone separator for convenient removal of blasting media. The QUIK-BLAST uses any commercially available media intended for suction type sandblasting guns. Special expensive media is not required.
The rugged, tubular steel 2-wheeled cart makes the QUIK-BLAST easy to maneuver from one location to another.
Design Features Cyclone Separator
Unique design of the separator function provides a cyclonic effect for more efficient cleaning of the blasting media. This results in longer media life.Efficient Heavy-Duty 2-Stage Filter
Long-lasting filter requires less maintenance than conventional types. Filtration is 99%+ efficient per SAE FINE DUST TEST. Assures a clean, dust-free work area.1-Piece Rotationally Molded Polyethylene Body
Rugged construction withstands long, hard use.
Tapered Media Hopper
Assures efficient and longer use of the blasting media.
4″ Front-Mounted Clean-Out Drain
Conveniently located drain makes removing blasting media quick and easy. Powerful Motor and Protected Silencer
The powerful 1.3 HP vacuum motor delivers 86″ W.C. of negative pressure to efficiently recover all blasting media and debris. The QUIK-BLAST’s silencer reduces noise levels below that of OSHA regulations.Special Design Rubber Bellows
Blasting media and debris cannot escape into the air — operation is clean, dustless. Eliminates need for work area clean-up.2-Wheeled Tubular Steel Frame
Frame with 8″ wheels, an integral part of the assembly, makes the QUIK-BLAST easily and highly mobile.
20-Ft. Hose for Longer Reach
20-Ft. Power Cord with Grounding Plug
Shipped in 2 Cartons Via U.P.S. Specifications
Motor: 1.3 HP
Power Consumption: 1000W 120 VAC 9A
Air Volume: 8-20 cfm for continuous use
Air Pressure: 75-125 psi minimum
Rubber Bellows: Straight, Inside 90°
Bellows Brush: For Irregular Surfaces
Hose Length: 7 feet (QB-1) or 20 feet (QB-2)
Blasting Media: Any commercially available suction gun type
Dimensions: 20″ x 20″ x 54″
Shipping Weight: 65 lbs.
Accessories: Tungsten Carbide Blasting Nozzle
Available in 115VAC or 230VAC 50/60HZ
